Once again ECombat brings to you a feature packed battery charger at the best possible price. This charger is our Premium charger, for a more basic version see here: SkyRC e3N charger
The e6650 features the AUTO function microprocessor that sets the feeding current during the charging or discharging processes. The device is designed to cope with any type of battery, it will prevent overcharging which can lead to explosion risk.
The battery charger will disconnect the circuit automatically and sound an alarm if the charger detects any malfunction. Very quick to set up and it remembers the previous settings you used.
Delta-peak sensitivity: The automatic charge termination program based on the principle of the Delta-peak voltage detection. When the battery's voltage exceeds the threshold, the process will be terminated automatically.
Automatic charging current limit
You can set up the upper limit of the charging current when charging your NiCd or NiMH battery; it is useful for the NiMH battery of low impedance and capacity in the 'AUTO' charging mode.
The charging capacity is always calculated as the charging current multiplied by time. If the charging capacity exceeds the limit, the process will be terminated automatically. Simply set the maximum value to the capacity of your batteries.
Processing time limit:
You can also limit the maximum process time to avoid any possible defect to either the charger, your battery or even your laser tag guns.
Input power monitoring
If you're mobile and you charge your gaming guns from your car battery the charger monitors the DC input power source and prevents it from being damaged, by voltage monitoring. If it drops below the lower limit, the charge process will be ended automatically and the charger shut down.
The maximum five batteries’ data can be stored for users’ convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special programs setting.
The charger is capable of 1 to 5 cyclic and continuous process of charge>discharge or discharge>charge is operable for battery refreshing and Balancing to stimulate the battery's activity.
The charger also comes with a number of settings which make it useful for lithium type batteries too:
- Internal independent lithium battery balancer
- e6650 employs an individual-cell-voltage balancer. It isn’t necessary to connect an external balancer for balance charging.
- Balancing individual cells battery discharging
- During the process of discharging, e6650 can monitor and balance each cell of the battery individually. Error message will be indicated and the process will be ended automatically if the voltage of any single one cell is abnormal.
- Adaptable to various type of lithium battery
- e6650 is adaptable to various types of Lithium batteries, such as Li-ion, LiPo and the new LiFe series of batteries.
- Fast and storage mode of lithium battery
- Purposes to charge Lithium battery varies, ‘fast’ charge reduce the duration of charging, whereas ‘store’ state can control the final voltage of your battery, so as to store for a long time and protect useful time of the battery